Accesories - RJD TECHNOLOGY
Antenna
High gain outdoor Antena : This antenna is mounted outside and receives the mobile phone signal. The antenna is directional, and so is designed to point toward the nearest mobile phone mast to receive the maximum signal possible. Indoor antenna (7.5dBi) : The indoor antenna rebroadcasts the boosted signal. Unlike the outdoor antenna, this one is Patch-directional, and so broadcasts signal equally in directions. It is therefore designed to be placed in any wall where you wish to receive signal improvement.
Patch Panel Antenna
Patch Panel Antenna (Wall Mounted)
Frequency – 800 -2500Mhz
V.S.W.R – ≤1.5
Gain – 7Dbi / 8dbi/ 10 ± 1 DBI
Band Width- 136/790-MHz
Impendence- 50 ohms Polarization- vertical
Connector- N female or Customized
Omni Antenna
Omni Antenna (Ceiling Mount)
Frequency – 800 -2500Mhz
V.S.W.R – ≤1.5
Gain – 3dbi / 4Dbi / 5Dbi / 7Dbi
Band Width- 136/790-MHz
Impendence- 50 ohms
Polarization- vertical
Connector- N female or CConnector- N female or Customized
Omni Flat Antenna
Omni Flat Antenna (Ceiling Mount)
Frequency – 800 -2500Mhz
V.S.W.R – ≤1.5
Gain – 3dbi / 4Dbi / 5Dbi / 7Dbi
Band Width- 136/790-MHz
Impendence- 50 ohms
Polarization- vertical
Connector- N female or CConnector- N female or Customized
Yaagi Steel Antenna
Yaagi Steel Antenna
Frequency – 800 -2500Mhz
V.S.W.R – ≤1.5
Gain – 3dbi / 4Dbi / 5Dbi / 7Dbi
Band Width- 136/790-MHz
Impendence- 50 ohms
Polarization- vertical
Connector- N female or CConnector- N female or Customized
Yagi Antenna
Yagi Antenna
Frequency – 800 -2500Mhz
V.S.W.R – ≤1.5
Gain – 3dbi / 4Dbi / 5Dbi / 7Dbi
Band Width- 136/790-MHz
Impendence- 50 ohms
Polarization- vertical
Connector- N female or CConnector- N female or Customized
Cable
R/F cable : cable connects the outdoor antenna to the amplifier, and a cable connects the amplifier to the indoor antenna.
LMR 200 cable
LMR 200 cable
Frequency Range- DC-3GHz/6GHz/11GHz
Characteristic Impedance- 50ohm
VSWR =1.20
Contact Resistance inner conductor: =10mO
outer conductor: =2.5mO
LMR 400 cable
LMR 400 cable
Frequency Range- DC-3GHz/6GHz/11GHz
Characteristic Impedance- 50ohm
VSWR =1.20
Contact Resistance inner conductor: =10mO
outer conductor: =2.5mO
Dielectric Withstanding Voltage =2500V Cable –LMR400, LMR300, LMR240, LMR200, RG8, RG6,etc.
1/2 Inch Copper Cable
1/2 Inch Copper Cable
Frequency Range- DC-3GHz/6GHz/11GHz
Characteristic Impedance- 50ohm
VSWR =1.20
Contact Resistance inner conductor: =10mO
outer conductor: =2.5mO
Dielectric Withstanding Voltage =2500V Cable –LMR400, LMR300, LMR240, LMR200, RG8, RG6,etc.
Connector
A coaxial RF connector (radio frequency connector) is an electrical connector designed to work at radio frequencies in the multi-megahertz range. RF connectors are typically used with coaxial cables and are designed to maintain the shielding that the coaxial design offers.
LMR 400 Connector
LMR 400 Connector
N Female crimp Connector
Frequency Range- DC-3GHz/6GHz/11GHz
Characteristic Impedance- 50ohm
VSWR =1.20
Contact Resistance inner conductor: =10mO
outer conductor: =2.5mO
Dielectric Withstanding Voltage =2500V Cable –LMR400, LMR300, LMR240, LMR200, RG8, RG6,etc.
1/2 Inch Connector
1/2 Inch Connector
N Female crimp Connector
Frequency Range- DC-3GHz/6GHz/11GHz
Characteristic Impedance- 50ohm
VSWR =1.20
Contact Resistance inner conductor: =10mO
outer conductor: =2.5mO
Dielectric Withstanding Voltage =2500V Cable –LMR400, LMR300, LMR240, LMR200, RG8, RG6,etc.
Splitter
An RF Splitter/Combiner is a transmission component which divides or sums power between two or more ports. Typically they are used for connecting more than one antenna to a single radio and can also be used to connect multiple radios to a single antenna using the same frequency.
2 Way Power Splitter
2 Way Power Splitter
Frequency – 800-2500MHz
Average Power - 200W
Splitter Type – 3 way cavity Type
Connector Type- N Female
Ingress Protection- Indoor
3rd Order IMD(dBc) - NO IM3
Dimension - 235.2x60.2x25
Net Weight - 180g
3 Way Power Splitter
3 Way Power Splitter
Frequency – 800-2500MHz
Average Power - 200W
Splitter Type – 3 way cavity Type
Connector Type- N Female
Ingress Protection- Indoor
3rd Order IMD(dBc) - NO IM3
Dimension - 235.2x60.2x25
Net Weight - 180g
4 Way Splitter
4 Way Power Splitter
Frequency – 800-2500MHz
Average Power - 200W
Splitter Type – 3 way cavity Type
Connector Type- N Female
Ingress Protection- Indoor
3rd Order IMD(dBc) - NO IM3
Dimension - 235.2x60.2x25
Net Weight - 180g
